GoFiler Legato Script Reference   Legato v 1.5d Application v 5.25a

Table of Contents	< < Previous	Next >>

 

Chapter Five — General Functions (continued)

Get32Word Function

Overview

The Get32Word function retrieves a 32-bit dword or int from a buffer at a specified byte position.

Syntax/Parameters

Syntax

dword = Get32Word ( buffer data, int position, [boolean swap] );

Parameters

data

A buffer as bytes, chars, string or a handle to a Data Object. This is referenced on a byte by byte position to read two bytes that will create the 32-bit word.

position

An int specifying a zero-based position in bytes. This should point to the start of the data for the word. If the position plus the size of the data element is outside of the scope of the buffer, a range error will be returned.

swap

An optional boolean specifying whether or not to swap the incoming data by treating it as big-endian. By default, the data is treated as Intel little-endian (FALSE).

Return Value

Returns a dword comprised of the data read or 0 on failure. Use the GetLastError function to retrieve error information.

Remarks

The Get32Word function allows a script to reach into a buffer, access a specific section of bytes, and read it into an unsigned word. It is up to the programmer to extend the sign as required. Use the GetLastError, IsError or IsNotError function to differentiate between a return value of 0 and an error.

Related Functions

Get8Word — Gets an 8-bit byte from a string, char buffer or Data Object by offset with optional swap.

Get16Word — Gets a 16-bit word from string, char buffer or Data Object by offset with optional swap.

Get64Word — Gets a 64-bit qword from a string, char buffer or Data Object offset with optional swap.

Get32Float — Gets a 32-bit float from a string, char buffer or Data Object offset. Conversion is to 64-bit float.

Get64Float — Gets a 64-bit float from a string, char buffer or Data Object by offset.

Put8Word — Sets an 8-bit byte into a buffer or Data Object at a specified position.

Put16Word — Sets a 16-bit word into a buffer or Data Object at a specified position.

Put32Word — Sets a 32-bit dword into a buffer or Data Object at a specified position.

Put64Word — Sets a 64-bit qword into a buffer or Data Object at a specified position.

Put32Float — Sets a 32-bit float into a buffer or Data Object at a specified position.

Put64Float — Sets a 64-bit float into a buffer or Data Object at a specified position.

Platform Support

Go13, Go16, GoFiler Complete, GoFiler Corporate, GoFiler, GoFiler Lite, GoXBRL

Legato IDE, Legato Basic

 

Table of Contents	< < Previous	Next >>

GoFiler Legato Script Reference — Generated on 12/16/2024

© 2012-2024 Novaworks, LLC. All rights reserved worldwide. Unauthorized use, duplication or transmission prohibited by law. Portions of the software are protected by US Patents 10,095,672, 10,706,221 and 11,210,456. GoFiler™ and Legato™ are trademarks of Novaworks, LLC. EDGAR® is a federally registered trademark of the U.S. Securities and Exchange Commission. Novaworks is not affiliated with or approved by the U.S. Securities and Exchange Commission. All other trademarks are property of their respective owners. Use of the features specified in this language are subject to terms, conditions and limitations of the Software License Agreement.